Central Heating Leak Detection London

Boiler losing pressure? Constantly topping up your heating system with no obvious sign of a leak?

Ignite Leak Detection London investigates suspected leaks in central heating pipework, including concealed pipes beneath floors and inside walls. We use suitable testing to establish where pressure is being lost and narrow down areas for further investigation.

Does Losing Pressure Mean You Have a Leak?

Repeated pressure loss can indicate escaping water, but it does not automatically mean there is a leak beneath the floor.

Visible radiator connections, boiler components, expansion vessel problems and discharge through a pressure relief valve may also need investigation.

We assess the symptoms and available evidence before recommending specialist testing of concealed pipework.

Why Is My Boiler Losing Pressure?

Signs Worth Investigating

  • Repeatedly needing to top up the heating pressure.
  • Pressure falling after the system has been refilled.
  • Damp patches or staining near heating pipework.
  • Corrosion or moisture around radiator valves and connections.
  • Unexplained damage to flooring, skirting boards or nearby finishes.

A concealed heating leak may leave no visible damp patch, particularly where water escapes into a floor void or the ground.

How We Investigate

1

Assess the Symptoms

We discuss how quickly the pressure drops, whether it changes when the heating runs and what checks or repairs have already been completed.

2

Inspect Accessible Components

We inspect accessible heating pipework, radiators and connections for evidence of leakage and identify whether further boiler checks are needed.

3

Isolate and Test

Where the system allows, we isolate and test relevant sections to help distinguish boiler-side pressure loss from a leak in the heating circuit.

4

Investigate Concealed Pipework

We select suitable methods, which may include thermal imaging, moisture readings, acoustic testing and tracer gas detection.

5

Explain the Findings

We explain what the tests have established, any limitations and where targeted access or further investigation is recommended.

Tracer Gas for Heating Leaks

For suitable investigations, the affected heating pipework is isolated and prepared before a specialist tracer gas mixture is introduced under controlled conditions.

A sensitive detector is used to survey accessible areas for gas escaping through a defect. The findings help identify where further investigation or targeted access should be concentrated.

Gas can travel through floor voids, gaps and surrounding materials. Suspended floors and other building features may affect how closely surface readings correspond to the actual leak.

Tracer Gas Leak Detection

Thermal Imaging and Supporting Tests

Thermal imaging can reveal surface temperature patterns associated with heating pipe routes or escaping warm water. Moisture readings and other tests help us assess those patterns.

A thermal camera does not see through floors or walls, and some leaks produce little detectable temperature difference. We interpret the findings alongside the wider investigation.

Thermal Imaging Leak Surveys

Targeted Trace & Access

Where testing identifies a suspected leak area, we explain the proposed access and obtain authorisation before opening floors or walls.

The aim is to expose the relevant pipework, verify the defect and minimise unnecessary disruption. The amount of access required depends on the construction, pipe route and findings.

Trace & Access

Repairs and Testing

Once the leak is exposed, we can explain the repair options and provide a separate quotation where required.

Following an agreed repair, we test the affected pipework and refill and recommission the system as appropriate. Any making-good work to floors, walls or decoration is scoped separately.

Repairs & Reinstatement

Underfloor Heating Systems

If pressure loss appears to involve an underfloor heating system, individual circuits and accessible manifold components may need separate testing.

Underfloor Heating Leak Detection

Clear Advice on Costs

The cost depends on the system, access and testing required. Tell us how often you need to top up the pressure and send any previous engineer's findings so we can advise on the appropriate starting point.

We explain investigation charges before booking. Trace and access, repairs and reinstatement are quoted separately where required.

View Leak Detection Prices

Frequently Asked Questions

Tired of Topping Up Your Boiler?

Tell us how quickly the pressure drops and what has already been checked. We'll help you work out the next step.

[email protected]