Fulham's mix of Victorian terraces, mansion flats and modern riverside developments means hidden leaks can present in many different ways — from damp in a basement conversion to pressure loss in a newly installed underfloor heating system.
Ignite Leak Detection London provides specialist leak investigation services across Fulham, SW6 and the surrounding area. We use non-invasive testing methods to locate leaks accurately and minimise disruption to your property.
We attend, assess and explain our findings clearly. We never carry out unnecessary work and we always make sure you understand what is happening before recommending next steps.
Common Leak Problems in Fulham
Leaks in Victorian Terraces
Fulham's Victorian terraces often have ageing pipework running beneath timber floors and through walls. We investigate concealed leaks using tracer gas and thermal imaging without unnecessary disruption.
Basement Conversion Leaks
Many Fulham properties have converted basements that can be vulnerable to water ingress from concealed pipework or external sources. We use moisture mapping and testing to trace the cause.
Boiler Pressure Loss
Repeated pressure drops in a central heating system can indicate a hidden leak in the pipework or underfloor circuits. We carry out pressure testing to identify the source.
Ceiling Leaks Between Floors
Water appearing through a ceiling can originate from a bathroom, kitchen or concealed pipework above. We investigate systematically to identify the responsible pipe or fitting.
High Water Bills
An unexplained increase in your water bill may indicate a leak on the supply pipe or internal plumbing. We carry out pressure testing and tracer gas investigation.
Underfloor Heating Leaks
Refurbished Fulham properties often have water-based underfloor heating. We test individual circuits and use thermal imaging to investigate pressure loss in concealed floor systems.
Our Leak Detection Services
Hidden Water Leak Detection
We locate leaks concealed in walls, floors, ceilings and underground using tracer gas, thermal imaging and acoustic detection — identifying the source before any opening up is required.
Central Heating Leak Detection
We investigate pressure loss in heating systems, including radiator pipework, boiler connections and underfloor heating circuits. Visit our Central Heating Leak Detection page for details.
Water Main Leak Detection
We investigate leaks on underground supply pipes using tracer gas and acoustic testing, and advise on repair or replacement where needed.
Trace and Access
Where a leak is confirmed, we carry out targeted access to expose the affected pipework for repair and provide a written report for your insurer if required.
Insurance Investigation Reports
We provide detailed written reports documenting our investigation methods, findings and conclusions to support escape of water insurance claims.
Leak Repairs and Reinstatement
Once the leak is located, we carry out the plumbing repair and reinstate any access areas, leaving the property clean and tidy.
Equipment and Investigation Methods
Tracer Gas Detection
A safe gas mixture is introduced into the pipework and escapes at the leak point. A sensitive probe detects the gas at the surface, pinpointing the location without excavation.
Thermal Imaging
Thermal cameras detect temperature variations caused by escaping water behind walls, under floors and in ceilings — particularly useful for underfloor heating investigations.
Acoustic Detection
Sensitive listening equipment detects the sound of water escaping from pressurised pipes, effective on water mains, supply pipes and concealed heating circuits.
Pressure Testing
We isolate and pressurise sections of pipework to confirm whether a leak is present and narrow down the affected area before further testing.
Moisture Mapping
Systematic moisture readings help map the extent of water damage and identify the likely source and direction of travel within the property.
Dye Testing
Dye is introduced into waste or drainage systems to trace the path of water and identify whether a specific fitting, joint or waste pipe is contributing to the problem.
Our Investigation Process
- 1
Understand the Situation
We discuss what you have noticed — damp, pressure loss, ceiling stains or a high bill — and gather information about the property layout and plumbing.
- 2
Inspect Accessible Areas
We check visible pipework, fittings, valves and any signs of water damage to rule out straightforward causes before specialist testing.
- 3
Apply Specialist Methods
We use the most suitable method for your property — tracer gas, thermal imaging, acoustic detection or pressure testing — to locate the leak accurately.
- 4
Report Our Findings
We explain what we have found clearly, including the likely location, probable cause and the repair options available.
- 5
Recommend Next Steps
We advise on the best course of action — a targeted repair, a Trace and Access report for your insurer, or further investigation if needed.
Insurance and Trace & Access
Many Fulham homeowners have insurance policies that include cover for escape of water damage. We provide written investigation reports to support your claim.
If your policy includes Trace and Access cover, your insurer may contribute towards the cost of locating and accessing the leak. We provide the investigation and documentation required.
We recommend reviewing your policy wording before instructing work. We are happy to discuss what information your insurer is likely to need.
For more information, visit our Trace & Access page or our Insurance Reports page.
Areas and Postcodes Covered
We cover Fulham and the SW6 postcode area, including Fulham Broadway, Parsons Green, Munster Road, Wandsworth Bridge Road and the surrounding residential streets.
We also cover nearby areas including:
Frequently Asked Questions
Got a Leak? We'll FIND IT!
Call or WhatsApp Ignite Leak Detection London to discuss a leak at your Fulham property. We cover SW6, Fulham Broadway, Parsons Green and surrounding areas.
